 | This article needs additional citations for verification. (February 2024) |
Continuous transmission mode[1] is a telecommunications mode where a good part of the communication transmission links are of the continuous-mode type, in which the signal is present at all times.[2]
In more quantitative terms, continuous transmission mode takes place:
- at constant bit rate,
- when the communication channel is active for times much longer than both:
- the time needed to set up the channel itself, and/or
- the time needed to transmit any file or record or any other sequence of information bearing bits.
See also
[edit]References
[edit]- ^ Shafik, M. (2023-04-25) [25-27 September 2022]. Advances in Intelligent Traffic and Transportation Systems: Proceedings of the 6th International Conference on Intelligent Traffic and Transportation (ICITT). Incorporating the 6th International Conference on Communication and Network Technology (ICCNT). Paris: IOS Press. p. 48. ISBN 978-1-64368-385-0.
The continuous transmission mode is supported, that is, the full channel continuous transmission is realized by reading the pre-prepared form file...
- ^ Kazovsky, Leonid G.; Cheng, Ning; Shaw, Wei-Tao; Gutierrez, David; Wong, Shing-Wa (2011-04-20). Broadband Optical Access Networks. John Wiley & Sons. p. (Unpaginated). ISBN 978-0-470-92267-5.
Comparison of continuous-mode transmission and burst-mode transmission. In continuous mode transmission, continuous bit streams are sent from sources to destinations; if no data need to be sent, idle signals are sent.
 | This article related to telecommunications is a stub. You can help Wikipedia by expanding it. |