MARC-8

The MARC-8 charset is a MARC standard used in MARC-21 library records.^[1] The MARC formats are standards for the representation and communication of bibliographic and related information in machine-readable form, and they are frequently used in library database systems. The character encoding now known as MARC-8 was introduced in 1968 as part of the MARC format. Originally based on the Latin alphabet, from 1979 to 1983 the JACKPHY initiative expanded the repertoire to include Japanese, Arabic, Chinese, and Hebrew characters (among others), with the later addition of Cyrillic and Greek scripts. If a character is not representable in MARC-8 of a MARC-21 record, then UTF-8 must be used instead. UTF-8 has support for many more characters than MARC-8, which is rarely used outside library data.

MARC-8 uses a variant of the ISO-2022 encoding. It uses escape characters to represent characters beyond the 7-bit ASCII range of characters.

It generally uses the same logical BiDi ordering as Unicode.

The combining characters and base characters are in a different order than used in Unicode. The following are some examples. The combining characters are not always stored in reverse order as Unicode normalization. The MARC-21 standard describes the MARC-8 Unicode conversion issues in more detail.

Displayed Character	Unicode NFD	MARC-8
á	a  ́	́ a
ậ	a   ̣   ̂	̂   ̣ a

The ISO/IEC 2022 coding specifies a two-layer mapping between character codes and displayed characters. In MARC-8, character codes from the 7-bit ASCII graphic range (0x20–0x7F) are referred to as "G0" codes, while codes from the "high ASCII" range (0xA0–0xFF) are referred to as the "G1" codes. Graphic character sets are designated and invoked by means of a multiple byte escape sequence consisting of the escape character, an Intermediate character sequence, and a Final character in the form ESC I F.

The following table shows the intermediate byte after the ESC byte (hexadecimal 1B), and the corresponding ASCII characters.

Intermediate Bytes^[2]

	G0 set				G1 set
	SBCS		MBCS		SBCS		MBCS
Normal ISO-2022	28	(	24	$	29	)	24 29	$)
Alternate ISO-2022 (additional 63+16 sets)	2C	,	24 2C	$,	2D	-	24 2D	$-

The following table shows the final bytes in hexadecimal and the corresponding ASCII characters after the intermediate bytes.

Final Bytes^[2]

Bytes	Characters	Name	Type	Comment
31	1	Chinese, Japanese, Korean (EACC)	MBCS
32	2	Basic Hebrew	SBCS
33	3	Basic Arabic	SBCS
34	4	Extended Arabic	SBCS
42	B	Basic Latin (ASCII)	SBCS
21 45	!E	Extended Latin (ANSEL)	SBCS	The 21(hex) technically is a second byte of the Intermediate segment of this escape sequence.
4E	N	Basic Cyrillic	SBCS
51	Q	Extended Cyrillic	SBCS
53	S	Basic Greek (ISO 5428)	SBCS

The EACC is the only multibyte encoding of MARC-8, it encodes each CJK character in three ASCII bytes.

For example, to encode the U+4EBA CJK character (人) you will need the following bytes

 \x1B\x24\x31\x21\x30\x64

The \x1B\x24\x31 switches to EACC/CJK, and the \x21\x30\x64 corresponds to the U+4EBA.

In addition to the ISO-2022 character sets, the following custom sets are available too. The byte designation follows the escape byte (hexadecimal 1B). There is no intermediate byte.

Final Bytes^[2]

Bytes	Characters	Name	Type	Comment
62	b	Subscript set	SBCS
67	g	Greek Symbol set	SBCS	The alpha, beta, gamma characters normally do not round trip map to Unicode.
70	p	Superscript set	SBCS
73	s	Basic Latin (ASCII)	SBCS

MARC 21 uses GS (0x1D) as a record terminator, RS (0x1E) as a field terminator and US (0x1F) as a subfield delimiter.^[3]

The following alternative C1 control code set is defined for bibliographic applications such as library systems. It is mostly concerned with string collation, and with markup of bibliographic fields. Slightly different variants are defined in the German standard DIN 31626^[4] (published in 1978 and since withdrawn)^[5] and the ISO standard ISO 6630,^[6][7] the latter of which has also been adopted in Germany as DIN ISO 6630.^[8] Where these differ is noted in the table below where applicable. MARC-8 uses the coding of NSB and NSE from this set, and adds some additional format effectors in locations not used by the ISO version; however, MARC 21 uses this control set only in MARC-8 records, not in Unicode-format records.^[3]

If using the ISO/IEC 2022 extension mechanism, the DIN 31626 set is designated as the active C1 control character set with the sequence 0x1B 0x22 0x45 (ESC " E),^[4] and the ISO 6630 / DIN ISO 6630 set is designated with the sequence 0x1B 0x22 0x42 (ESC " B).^[6] The 1985 expansion of the ISO 6630 set can also be explicitly specified by using the sequence 0x1B 0x26 0x40 0x1B 0x22 0x42 (ESC & @ ESC " B).^[7]

Esc+	Dec	Hex	Acro	Name	Description[4][6][7]
G	135	87	CUS	Close-Up for Sorting	(DIN 31626, ISO 6630) Declares that two successive character sequences separated by a space or separator should be treated as one word for collation purposes.
H	136	88	NSB	Non-Sorting Characters Begin	(DIN 31626, ISO 6630, MARC 21) Marks the start of a sequence of characters to be ignored for collation purposes. MARC 21 uses this character in MARC-8 records, but uses 0x98 (SOS) in Unicode records for the same purpose.[3][9]
I	137	89	NSE	Non-Sorting Characters End	(DIN 31626, ISO 6630, MARC 21) Marks the end of a sequence of characters to be ignored for collation purposes. MARC 21 uses this character in MARC-8 records, but uses 0x9C (ST) in Unicode records for the same purpose.[3][9]
J	138	8A	FIL	Filler Character	(DIN 31626) Substitutes for a mandatory alphanumeric character in a field.
K	139	8B	TCI	Tag in Context Indicator	(DIN 31626) Within a bibliographic field, used to refer to data in another bibliographic field by its tag number.
			PLD	Partial Line Down	(ISO 6630) Not in the original edition of ISO 6630.[6] In the 1985 edition of ISO 6630,[7] used for Partial Line Down (see PLD).
L	140	8C	ICI	Identification Number in Context Indicator	(DIN 31626) Within a bibliographic field, used to refer to data in another bibliographic record by its ID number.
			PLU	Partial Line Up	(ISO 6630) Not in original edition of ISO 6630.[6] In the 1985 edition of ISO 6630,[7] used for Partial Line Up (see PLU).
M	141	8D	OSC[a]	Optional Syllabification[b] Control	(DIN 31626) Marks a syllable boundary in a long word. See also soft hyphen.
			ZWJ	Joiner	(MARC 21) In MARC-8, used for the Zero-Width Joiner, while U+200D is used in Unicode-format MARC records.[3][9]
N	142	8E	SS2	Single-Shift 2	(DIN 31626) Non-locking shift code, see SS2.
			ZWNJ	Non-Joiner	(MARC 21) In MARC-8, used for the Zero-Width Non-Joiner, while U+200C is used in Unicode-format MARC records.[3][9]
O	143	8F	SS3	Single-Shift 3	(DIN 31626) Non-locking shift code, see SS3.
P	144	90	-	(reserved)
Q	145	91	EAB	Embedded Annotation Beginning	(DIN 31626, ISO 6630) Marks the start of a variable-length annotation which is embedded within a bibliographic field, as opposed to separated using content designation.
R	146	92	EAE	Embedded Annotation End	(DIN 31626, ISO 6630) Marks the end of a variable-length embedded annotation.
S	147	93	ISB	Item Specification Beginning	(DIN 31626) Marks the start of a string of specific information of some description, other than a keyword or a permutation string.
T	148	94	ISE	Item Specification End	(DIN 31626) Marks the end of a string of specific information.
U	149	95	SIB	Sorting Interpolation Beginning	(ISO 6630) Marks the beginning of a sequence of characters used for collation purposes only.
V	150	96	SIE	Sorting Interpolation End	(ISO 6630) Marks the end of a sequence of characters used for collation purposes only.
W	151	97	SSB	Secondary Sorting Value Beginning	(ISO 6630) Marks the start of a string with subordinate collation value.
X	152	98	SSE	Secondary Sorting Value End	(ISO 6630) Marks the end of a string with subordinate collation value.
Y	153	99	INC	Indicator for Non-Standard Character	(DIN 31626) Identifies a following non-standard character.
Z	154	9A	-	(reserved)
[	155	9B	-	(reserved)
\	156	9C	KWB	Keyword Beginning	(DIN 31626, ISO 6630) Marks the start of a keyword within a bibliographic field.
]	157	9D	KWE	Keyword End	(DIN 31626, ISO 6630) Marks the end of a keyword within a bibliographic field.
^	158	9E	PSB	Permutation String Beginning	(DIN 31626, ISO 6630) Marks the start of a string which is to be permuted to the front of the element when references or indices are generated. Terminated by PSE or by the end of the element.
_	159	9F	PSE	Permutation String End	(DIN 31626, ISO 6630) Marks the end of a string which is to be permuted to the front of the element.

• MARC 21 Specifications for Record Structure, Character Sets, and Exchange Media - The official MARC-8 standard as maintained by the US Library of Congress