View text source at Wikipedia
This article needs additional citations for verification. (June 2016) |
Developer(s) | Igor Funa |
---|---|
Stable release | 0.1.3.12
/ February 1, 2012 |
Operating system | Win32 |
Type | Compiler |
License | Freeware |
Website | turbo51 |
Turbo51 is a compiler for the programming language Pascal, for the Intel MCS-51 (8051) family of microcontrollers. It features Borland Turbo Pascal 7 syntax, support for inline assembly code, source-level debugging, and optimizations, among others. The compiler is written in Object Pascal and produced with Delphi.
In the 1980s, Intel introduced the 8051 as the first member of the MCS-51 processor family. Today, hundreds of cheap derivatives are available from tens of manufacturers. This makes the architecture very interesting for professionals and hobbyists. It is surprising that this 8-bit architecture is still in use today, and is still so popular. Of all 8051 compilers, several widely used C compilers exist, but only a few Pascal compilers. Turbo51 is available as freeware and was created with the goal to make a Pascal compiler for MCS-51 processors that will be as fast as Turbo Pascal, will use the same syntax and will generate high quality optimized code.
Turbo51 uses Borland Turbo Pascal 7 dialect. The syntax was extended with some constructs to support specific features of MCS-51 processors.
Var RS485_TX: Boolean absolute P3.2;
I2C.SDA: Boolean absolute P3.7;
I2C.SCL: Boolean absolute P3.4;
EEPROM_Data: TEEPROM_Data XDATA absolute 0;
ModuleAddress: Byte;
RX_LedTimer: Byte;
TX_LedTimer: Byte;
SavedOutput: TOutputData IDATA;
OutputsAuxData: Array [1..8] of Byte IDATA;
Program HelloWorld;
Const
Osc = 22118400;
BaudRate = 19200;
BaudRateTimerValue = Byte (- Osc div 12 div 32 div BaudRate);
Var SerialPort: Text;
Procedure WriteToSerialPort; Assembler;
Asm
CLR TI
MOV SBUF, A
@WaitLoop:
JNB TI, @WaitLoop
end;
Procedure Init;
begin
TL1 := BaudRateTimerValue;
TH1 := BaudRateTimerValue;
TMOD := %00100001; { Timer1: no GATE, 8 bit timer, autoreload }
SCON := %01010000; { Serial Mode 1, Enable Reception }
TI := True; { Indicate TX ready }
TR1 := True; { Enable timer 1 }
Assign (SerialPort, WriteToSerialPort)
end;
begin
Init;
Writeln (SerialPort, 'Hello world!')
end.